3Com 4200G PWR - Page 16

16 3Com Switch 4200G Family
Command Reference
display snmp-agent mib-view
The display snmp-agent mib-view command is used to view the MIB view configuration information of
the current Ethernet switch.
Any view
display snmp-agent statistics
Use the display snmp-agent statistics command to view the statistics information about SNMP
packets.
Any view
display snmp-agent sys-info
Use the display snmp-agent sys-info command to view the system information of SNMP configuration.
Any view
display snmp-agent trap-list
Use the display snmp-agent trap-list command to display trap list information.
Any view
display snmp-agent usm-user
Use the display snmp-agent usm-user command to view SNMP user information.
Any view
display ssh server
Use the display ssh server command to display the status or session information about the SSH server
Any view
display ssh server-info
Use the display ssh server-info command to display the association between the server public keys
configured on the client and the servers.
Any view
display ssh user-information
Use the display ssh user-information command to display information about the current SSH users,
including user name, authentication mode, key name and authorized service types. If the username is
specified, the command displays information about the specified user.
Any view
display startup
Use the display startup command to display the startup configuration of a switch, including the name of
the current startup configuration file, the names of the main startup configuration file, and backup startup
configuration file to be used when the switch starts the next time, and so on.
Any view
display stop-accounting-buffer
Use the display stop-accounting-buffer command to view the no-response stop-accounting request
packets buffered in the device.
Any views
display stp
Use the display stp command to display the state and statistical information about one or all spanning
trees.
Any view
display stp region-configuration
Use the display stp region-configuration command to display the MST region configuration.
Any view
display tcp statistics
Use the display tcp statistics command to view the statistics information about TCP packets.
Any view
display tcp status
Use the display tcp status command to view the TCP connection state.
Any view
display this
Use the display this command to display the current configuration performed in the current view of the
system.
Any view
display time-range
Use the display time-range command to view the configuration and status of the current time range. You
will see the active or inactive state outputs respectively.
Any view