3Com Switch 4200G Family 31
Command Reference
reset counters interface
Use the reset counters interface command to clear the statistics of the port, preparing for a new
statistics collection.
User view
reset dot1x statistics
Use the reset dot1x statistics command to clear the statistics of 802.1x.
User view
reset garp statistics
Use the reset garp statistics command to clear the GARP statistics (such as the information about the
packets received/sent/discarded by GVRP/GMRP) on specified (or all) ports.
User view
reset igmp-snooping statistics
Use the reset igmp-snooping statistics command to clear the IGMP Snooping statistics.
User view
reset ip statistics
Use the reset ip statistics command to clear the IP statistics information.
User view
reset logbuffer
Use the reset logbuffer command to clear information in the log buffer.
User view
reset ndp statistics
Use the reset ndp statistics command to reset the NDP counters to clear the NDP statistics.
User view
reset radius statistics
Use the reset radius statistics command to clear the statistics information about the RADIUS protocol.
User view
reset recycle-bin
Use the reset recycle-bin command to completely delete file(s) in the recycle bin in the Flash.
User view
reset saved-configuration
Use the reset saved-configuration command to delete the configuration file that is of the specified
attribute from the Flash, including the main and backup configuration files to be used when the switch starts
the next startup.
User view
reset stop-accounting-buffer
Use the reset stop-accounting-buffer command to delete the buffered no-response stop-accounting
request packets.
User view
reset stp
Use the reset stp command to clear the STP statistics of specified Ethernet ports.
User view
reset tcp statistics
Use the reset tcp statistics command to clear the TCP statistics information.
User view
reset traffic-limit
Use the reset traffic-limit command to clear the statistics of the traffic policing matching with the
specified ACL rules.
Ethernet Port view
reset traffic-statistic
Use the reset traffic-statistic command to clear the traffic statistics of the packets matching with the
specified ACL rules.
Ethernet Port view
reset trapbuffer
Use the reset trapbuffer command to clear information in the trap buffer.
User view
retry
Use the retry command to set the maximum number of transmission attempts of RADIUS requests.
Detecting Group view
To Next Page
Loading...
