3Com 4200G PWR - Methods of Managing a Switch

32 3Com Switch 4200G Family
Command Reference
retry realtime-accounting
Use the retry realtime-accounting command to set the maximum allowed number of continuous
no-response real-time accounting requests.
RADIUS Scheme view
retry stop-accounting
Use the retry stop-accounting command to set the maximum number of transmission attempts of the
stop-accounting requests buffered due to no response.
RADIUS Scheme view
return
Use the return command to return to user view from any other view.
System view or higher level views
revision-level
Use the revision-level command to set the MSTP revision level for a switch.
MST Region view
rmdir
Use the rmdir command to delete the specified directory from the remote SFTP server.
SFTP Client view
rmdir
Use the rmdir command to delete a directory.
User view
Because only empty directories can be deleted, you need to delete the files in a directory before deleting it.
rmdir
Use the rmdir command to delete the specified directory from the remote FTP server.
FTP Client view
You can only use this command to remove directories that are empty.
rmon alarm
Use the rmon alarm command to add an entry to the alarm table.
System view
rmon event
Use the rmon event command to add an entry to the event table.
System view
rmon history
Use the rmon history command to add an entry to the history control table.
Ethernet Port view
rmon prialarm
Use the rmon prialarm command to add an entry to the extended RMON alarm table.
System view
rmon statistics
Use the rmon statistics command to add an entry to the statistic table.
Ethernet Port view
rsa local-key-pair create
Use the rsa local-key-pair create command to generate RSA key pairs, whose names are in the format
of switch name plus _host, for example, S4200G_host.
System view
rsa local-key-pair destroy
Use the rsa local-key-pair destroy command to destroy all existing RSA key pairs at the server end.
System view
rsa peer-public-key
Use the rsa peer-public-key command to enter public key view.
System view
rsa peer-public-key
Use the rsa peer-public-key command to enter public key view.
System view
rule (Advanced ACL)
Use the rule command to define an ACL rule.
Advanced ACL view