1-8
Switch 4210G NT 48-Port
Front Panel
Figure 1-11 Front panel of the Switch 4210G NT 48-Port Ethernet switch
(1) 10/100/1000 Base-T auto-sensing Ethernet port
(2) 10/100/1000 Base-T auto-sensing Ethernet port status LED
(3) Console port (4) Seven-segment LED
(5) Port mode LED (Mode) (6) System status LED (PWR)
(7) RPS status LED (RPS) (8) Port status LED mode switching button
(9) 1000Base-X SFP port (10) 1000Base-X SFP port status LED
Rear Panel
Figure 1-12 Rear panel of the Switch 4210G NT 48-Port Ethernet switch
(1) AC power input (2) RPS power input (shipped with a protective cover)
(3) Grounding screw (4) “DO NOT REMOVE” label
The Switch 4210G NT 48-Port does not support any interface modules.
Ports
Console Port
Each Switch 4210G provides one console port on the front panel. Table 1-2 describes the console port
specifications.
To Next Page
Loading...
