3Com 4210G Series - Configuring the Member Devices; Configuring Access between the Management Device and Its Member Devices

26-13
Removing a member device
To do… Use the command… Remarks
Enter system view system-view —
Enter cluster view cluster —
Remove a member device from
the cluster
delete-member member-number
[ to-black-list ]
Required
Rebooting a member device
To do… Use the command… Remarks
Enter system view system-view —
Enter cluster view cluster —
Reboot a specified member
device
reboot member { member-number |
mac-address mac-address } [ eraseflash ]
Required
Configuring the Member Devices
Enabling NDP
Refer to Enabling NDP Globally and for Specific Ports.
Enabling NTDP
Refer to Enabling NTDP Globally and for Specific Ports.
Manually Collecting Topology Information
Refer to Manually Collecting Topology Information.
Enabling the Cluster Function
Refer to Enabling the Cluster Function.
Deleting a Member Device from a Cluster
To do… Use the command… Remarks
Enter system view system-view —
Enter cluster view cluster —
Delete a member device from the cluster undo administrator-address Required
Configuring Access Between the Management Device and Its
Member Devices
After having successfully configured NDP, NTDP and cluster, you can configure, manage and monitor