EasyManua.ls Logo

3Com 4210G Series - Protocols and Standards

3Com 4210G Series
1133 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-8
z Sub-option 1: IP address of the primary network calling processor, which is a server serving as the
network calling control source and providing program downloads.
z Sub-option 2: IP address of the backup network calling processor that DHCP clients will contact
when the primary one is unreachable.
z Sub-option 3: Voice VLAN ID and the result whether DHCP clients take this ID as the voice VLAN
or not.
z Sub-option 4: Failover route that specifies the destination IP address and the called number (SIP
users use such IP addresses and numbers to communicate with each other) that a SIP user uses
to reach another SIP user when both the primary and backup calling processors are unreachable.
You must define the sub-option 1 to make other sub-options effective.
Protocols and Standards
z RFC 2131: Dynamic Host Configuration Protocol
z RFC 2132: DHCP Options and BOOTP Vendor Extensions
z RFC 1542: Clarifications and Extensions for the Bootstrap Protocol
z RFC 3046: DHCP Relay Agent Information Option

Table of Contents

Other manuals for 3Com 4210G Series

Related product manuals