3Com 4210G Series - Enabling the Listening Port of the RADIUS Client; Displaying and Maintaining RADIUS; Configuring HWTACACS

1-30
You can specify up to eight security policy servers for a RADIUS scheme.
Enabling the Listening Port of the RADIUS Client
Follow these steps to enable the listening port of the RADIUS client:
To do… Use the command… Remarks
Enter system view system-view —
Enable the listening port of the RADIUS
client
radius client enable
Optional
Enabled by default
Displaying and Maintaining RADIUS
To do… Use the command… Remarks
Display the configuration
information of a specified
RADIUS scheme or all RADIUS
schemes
display radius scheme
[ radius-scheme-name ] [ slot
slot-number ]
Available in any
view
Display statistics about RADIUS
packets
display radius statistics [ slot
slot-number ]
Available in any
view
Display information about
buffered stop-accounting
requests that get no responses
display stop-accounting-buffer
{ radius-scheme radius-server-name |
session-id session-id | time-range
start-time stop-time | user-name
user-name } [ slot slot-number ]
Available in any
view
Clear RADIUS statistics
reset radius statistics [ slot
slot-number ]
Available in user
view
Clear buffered stop-accounting
requests that get no responses
reset stop-accounting-buffer
{ radius-scheme radius-server-name |
session-id session-id | time-range
start-time stop-time | user-name
user-name } [ slot slot-number ]
Available in user
view
Configuring HWTACACS
Different from RADIUS, except for deleting HWTACACS schemes and changing the IP addresses of
the HWTACACS servers, you can make any changes to HWTACACS parameters, whether there are
users online or not.