9-1
9 SFTP Configuration
When configuring SFTP, go to these sections for information you are interested in:
z SFTP Overview
z Configuring an SFTP Server
z Configuring an SFTP Client
z SFTP Client Configuration Example
z SFTP Server Configuration Example
SFTP Overview
The secure file transfer protocol (SFTP) is a new feature in SSH2.0.
SFTP uses the SSH connection to provide secure data transfer. The device can serve as the SFTP
server, allowing a remote user to log into the SFTP server for secure file management and transfer.
The device can also server as an SFTP client, enabling a user to login from the device to a remote
device for secure file transfer.
Configuring an SFTP Server
Configuration Prerequisites
z You have configured the SSH server. For the detailed configuration procedure, refer to
Configuring the Device as an SSH Server.
z You have used the ssh user service-type command to set the service type of SSH users to sftp or
all. For configuration procedure, refer to
Configuring an SSH User.
Enabling the SFTP Server
This configuration task is to enable the SFTP service so that a client can log into the SFTP server
through SFTP.
Follow these steps to enable the SFTP server:
To do… Use the command… Remarks
Enter system view system-view —
Enable the SFTP server sftp server enable
Required
Disabled by default
To Next Page
Loading...
