9-22
Command Line Error Information
The commands are executed only if they have no syntax error. Otherwise, error information is reported.
Table 9-7 lists some common errors.
Table 9-7 Common command line errors
Error information Cause
The command was not found.
The keyword was not found.
Parameter type error
% Unrecognized command found at '^' position.
The parameter value is beyond the allowed
range.
% Incomplete command found at '^' position. Incomplete command
% Ambiguous command found at '^' position. Ambiguous command,
Too many parameters Too many parameters
% Wrong parameter found at '^' position. Wrong parameter
To Next Page
Loading...
