3Com 5500-EI PWR - Page 11

1-10
View
Available
operation
Prompt example Enter method Quit method
OSPF view
Configure OSPF
protocol
parameters
[Sysname-ospf-1]
Execute the ospf
command in
system view.
OSPF area
view
Configure OSPF
area parameters
[Sysname-ospf-1-
area-0.0.0.1]
Execute the area
command in OSPF
view.
Execute the
quit command
to return to
OSPF view.
Execute the
return
command to
return to user
view.
Routing policy
view
Configure routing
policy
[Sysname-route-p
olicy]
Execute the
route-policy
command in
system view.
Basic ACL
view
Define rules for a
basic ACL (with ID
ranging from 2000
to 2999)
[Sysname-acl-
basic-2000]
Execute the acl
number command
in system view.
Advanced
ACL view
Define rules for an
advanced ACL
(with ID ranging
from 3000 to 3999)
[Sysname-acl-adv-
3000]
Execute the acl
number command
in system view.
Layer 2 ACL
view
Define rules for an
layer 2 ACL (with
ID ranging from
4000 to 4999)
[Sysname-acl-ethe
rnetframe-4000]
Execute the acl
number command
in system view.
User-defined
ACL view
Define rules for a
user-defined ACL
(with ID ranging
from 5000 to 5999)
[Sysname-acl-user
-5000]
Execute the acl
number command
in system view.
QoS profile
view
Define QoS profile
[Sysname-qos-pro
file-a123]
Execute the
qos-profile
command in
system view.
RADIUS
scheme view
Configure RADIUS
scheme
parameters
[Sysname-radius-1
]
Execute the radius
scheme command
in system view.
ISP domain
view
Configure ISP
domain parameters
[Sysname-isp-aaa
123.net]
Execute the
domain command
in system view.
Remote-ping
test group
view
Configure
remote-ping test
group parameters
[Sysname-remote-
ping-a123-a123]
Execute the
remote-ping
command in
system view.
HWTACACS
view
Configure
HWTACACS
parameters
[Sysname-hwtaca
cs-a123]
Execute the
hwtacacs scheme
command in
system view.
Execute the
quit command
to return to
system view.
Execute the
return
command to
return to user
view.