2-11
To do… Use the command… Remarks
Set the authentication
password for the local user
password { simple | cipher }
password
Required
Specify the service type for
AUX users
service-type terminal [ level
level ]
Required
Quit to system view
quit
—
Enter AUX user interface view user-interface aux 0 —
Configure to authenticate
users locally or remotely
authentication-mode
scheme [ command-
authorization ]
Required
The specified AAA scheme
determines whether to
authenticate users locally or
remotely.
By default, users logging in
through the console port (AUX
user interface) are not
authenticated.
Set the baud
rate
speed speed-value
Optional
The default baud rate of the AUX
port (also the console port) is
19,200 bps.
Set the check
mode
parity { even | none | odd }
Optional
By default, the check mode of a
console port is set to none, that
is, no check bit.
Set the stop
bits
stopbits { 1 | 1.5 | 2 }
Optional
The default stop bits of a console
port is 1.
Configure
the console
port
Set the data
bits
databits { 7 | 8 }
Optional
The default data bits of a console
port is 8.
Configure the command level
available to users logging in to
the user interface
user privilege level level
Optional
By default, commands of level 3
are available to users logging in to
the AUX user interface.
Make terminal services
available to the user interface
shell
Optional
By default, terminal services are
available in all user interfaces.
Set the maximum number of
lines the screen can contain
screen-length screen-length
Optional
By default, the screen can contain
up to 24 lines.
You can use the screen-length 0
command to disable the function
to display information in pages.
Set history command buffer
size
history-command max-size
value
Optional
The default history command
buffer size is 10. That is, a history
command buffer can store up to
10 commands by default.
To Next Page
Loading...
