1-33
[Sysname-Ethernet1/0/2] traffic-priority inbound ip-group 3000 rule 1
local-precedence 3
[Sysname-Ethernet1/0/2] traffic-priority inbound ip-group 3000 rule 2
local-precedence 2
[Sysname-Ethernet1/0/2] quit
3) Configure queue scheduling
# Apply SP queue scheduling algorithm.
[Sysname] queue-scheduler strict-priority
VLAN Mapping Configuration Example
Network requirements
Two customer networks are connected to the public network through Switch A and Switch
B. Configure the VLAN mapping function on the switches to enable the hosts on the two
customer networks to communicate through public network VLANs.
z Switch A provides network access for terminal devices in VLAN 100 and VLAN 200
through Ethernet 1/0/11 and Ethernet 1/0/12. On the other side of the public network,
Switch B provides network access for servers in VLAN 100 and VLAN 200 through
Ethernet 1/0/15 and Ethernet 1/0/16.
z Switch A provides access to the public network through Ethernet 1/0/10 and Switch B
provides access to the public network through Ethernet 1/0/17.
Configure the switches to have packets of VLAN 100 and packets of VLAN 200 transmitted
in VLAN 500 and VLAN 600 across the public network.
To Next Page
Loading...
