3Com 5500-EI PWR - Displaying and Maintaining Qos Profile Configuration

2-4
To do… Use the command… Remarks
Configure the
mode to apply a
QoS profile as
port-based
qos-profile
port-based
Specify the
mode to
apply a
QoS profile
Configure the
mode to apply a
QoS profile as
user-based
undo qos-profile
port-based
Optional
By default, the mode to
apply a QoS profile is
user-based.
z If the 802.1x
authentication mode is
MAC address-based, the
mode to apply a QoS
profile must be
configured user-based.
z If the 802.1x
authentication mode is
port-based, the mode to
apply a QoS profile must
be configured as
port-based.
Follow these steps to apply a QoS profile manually:
To do… Use the command… Remarks
Enter system view
system-view
—
In system view
apply qos-profile
profile-name interface
interface-list
Enter
Ethernet port
view
interface interface-type
interface-number
Apply a QoS
profile to
specific
ports
In Ethernet
port view
Apply a QoS
profile to the
current port
apply qos-profile
profile-name
Select either
of the
operations.
By default, a
port has no
QoS profile
applied to it.
Displaying and Maintaining QoS Profile Configuration
To do… Use the command… Remarks
Display QoS profile
configuration
display qos-profile { all | name
profile-name | interface
interface-type interface-number |
user user-name }
Available in any view