3Com 5500-EI PWR - Enhanced Cluster Feature Configuration Example

1-24
[aaa_0.Sysname-cluster]
# Configure VLAN-interface 2 as the network management interface.
[aaa_0.Sysname] cluster
[aaa_0.Sysname-cluster] nm-interface Vlan-interface 2
Enhanced Cluster Feature Configuration Example
Network requirements
z The cluster operates properly.
z Add the device with the MAC address 0001-2034-a0e5 to the cluster blacklist, that is, prevent the
device from being managed and maintained by the cluster.
z Save the current cluster topology as the base topology and save it in the flash of the local
management device in the cluster.
Network diagram
Figure 1-6 Network diagram for the enhanced cluster feature configuration
FTP server
192.168.0.4
2
4
3
192. 168.0.1
0001-2034-a0e5
Management
device
Member
device
Member
device
Member
device
1
Configuration procedure
# Enter cluster view.
<aaa_0.Sysname> system-view
[aaa_0.Sysname] cluster
# Add the MAC address 0001-2034-a0e5 to the cluster blacklist.
[aaa_0.Sysname-cluster] black-list add-mac 0001-2034-a0e5
# Backup the current topology.
[aaa_0.Sysname-cluster] topology accept all save-to local-flash