1-7
To do… Use the command… Remarks
Configure the probe timeout
time
timeout time
Optional
By default, a probe times out in
three seconds.
Configure the type of service
(ToS)
tos value
Optional
By default, the service type is
zero.
Start the test
test-enable
Required
Display test results
display remote-ping results
[ admin-name operation-tag ]
Required
Available in any view.
In an ICMP test, after you specify a source interface by the source-interface interface-type
interface-number command, the TTL value turns to 1 automatically to test the directly connected
devices.
2) Configuring DHCP test on remote-ping client
Follow these steps to configure DHCP test on remote-ping client:
To do… Use the command… Remarks
Enter system view
system-view
—
Enable the remote-ping
client function
remote-ping-agent enable
Required
By default, the remote-ping client
function is disabled.
Create a remote-ping
test group and enter its
view
remote-ping
administrator-name
operation-tag
Required
By default, no test group is configured.
Configure the source
interface
source-interface
interface-type
interface-number
Required
You can only configure a VLAN interface
as the source interface.
By default, no source interface is
configured.
Configure the test type
test-type dhcp
Required
By default, the test type is ICMP.
Configure the number
of probes per test
count times
Optional
By default, each test makes one probe.
Configure a test
description
description string
Optional
By default, no description information is
configured.
Configure the
maximum number of
history records that can
be saved
history-records number
Optional
By default, the maximum number is 50.
To Next Page
Loading...
