3Com 5500-EI PWR - Command Line Interface Management Using SSH; Web Interface Management; SNMP Management

Methods of Managing a Switch 31
Command Line
Interface
Management using
SSH
The Switch 5500 supports Secure Shell version 1.5 (SSHv1.5), allowing
secure access to the Command Line Interface of the Switch.
If you use SSH to administer your Switch and the network traffic is
intercepted, no passwords or configuration information will be visible in
the data. To securely administer the Switch using the Command Line
Interface you need a third party SSH client.
Web Interface
Management
Each Switch has an internal set of web pages that allow you to manage
the Switch using a Web browser remotely over an IP network (see
Figure 9
).
Figure 9 Web Interface Management over the Network
Refer to “Setting Up Web Interface Management” on page 46.
SNMP Management You can manage a Switch using any network management workstation
running the Simple Network Management Protocol (SNMP) as shown in
Figure 10
. For example, you can use the 3Com Network Director
software, available from the 3Com website.
Figure 10 SNMP Management over the Network
Refer to “Setting Up SNMP Management V1 or V2” on page 47.
Switch
Workstation
Connect over Network
via web browser
Switch
SNMP Network Management
Workstation
Connect over Network
using SNMP
DUA1715-0AAA02.book Page 31 Wednesday, March 23, 2005 11:17 AM