3Com 5500-SI - Page 7

3Com Switch 5500 Family 7
Quick Reference Guide
debugging
Use the debugging command to enable the system debugging.
User view
debugging arp packet
Use the debugging arp command to enable ARP debugging.
User view
debugging dhcp client
Use the debugging dhcp client command to enable DHCP client debugging.
User view
debugging dhcp-relay
Use the debugging dhcp-relay command to enable DHCP relay debugging.
User view
debugging dhcp server
Use the debugging dhcp server command to enable a specified type or all types of debugging on a DHCP
server.
User view
debugging dhcp xrn xha
Use the debugging dhcp xrn xha command to enable BOOTP client hot backup debugging.
User view
debugging dhcp xrn xha
Use the debugging dhcp xrn xha command to enable DHCP client hot backup debugging.
User view
debugging DLDP
Use the debugging dldp command to enable specific debugging for DLDP on all ports with DLDP enabled.
User view
debugging hwtacacs
Use the debugging hwtacacs command to enable HWTACACS debugging.
User view
debugging igmp
Use the debugging igmp command to enable IGMP debugging functions.
User view
debugging lacp packet
Use the debugging lacp packet command to enable LACP packets debugging at a designated port or
ports.
User view
debugging lacp state
Use the debugging lacp state command to enable LACP state machines debugging on a designated port
or ports.
User view
debugging link-aggregation error
Use the debugging link-aggregation error command to enable link aggregation error debugging.
User view
debugging link-aggregation event
Use the debugging link-aggregation event command to enable link aggregation events debugging.
User view
debugging mac-authentication event
Use the debugging mac-authentication event command to enable debugging for centralized MAC
address authentication events.
User view
debugging msdp
Use the debugging msdp command to enable debugging for MSDP.
User view
debugging multicast forwarding
Use the debugging multicast forwarding to enable multicast packet forwarding debugging functions.
User view
debugging multicast kernel-routing
Use the debugging multicast kernel-routing to enable multicast kernel routing debugging functions.
User view