Take Your First Snapshot!
Capture, Edit and Save the Image
1 Open the HomeConnect Video Launcher. Click
Video gear
and select
PhotoStudio
. PhotoStudio launches.
2 Identify the Digital Video Camera as your source. Click
File
and select
Select
Source...
from the drop down menu. The
Select Source
dialog box appears.
3 Select
Digital Video Camera
and click
Select
.
4 Click
File
and select
Acquire
.... The photo capture tool appears.
5 Focus on the image you want to capture,
and then click the
Capture
button. The
image is stored in the preview bar.
6Click the preview image, and then click
the
Transfer & Exit button
. You can now
make changes to the image using the
tools on the left side of the screen.
7 To save the file with changes, click
File
and select
Save As
.... Assign the file a
name and select
Jpeg File (*.JPG)
from
the
Save as type
: menu. Then select the
destination where you want to store the
file and click
Save
.
8 The image is now saved. Go to the next section to learn how to add this
image to an album.
4
Capture
Delete
Transfer & Exit
To Next Page
Loading...