Rear Panel 17
7 Power Adapter Socket
Only use the power adapter supplied with this Gateway. Do not use any
other adapter.
8 Ethernet Cable/DSL port
Use the supplied patch cable to connect the Gateway to the Ethernet
port on your cable or DSL modem. The port will automatically adjust to
the correct speed and duplex.
9 Four 10/100 LAN ports
Using suitable RJ-45 cable, you can connect your Gateway to a computer,
or to any other piece of equipment that has an Ethernet connection (for
example, a hub or a switch). The LAN ports are configured as MDIX, for
connection to a computer with a straight through RJ-45 cable.
To Next Page
Loading...