62 CHAPTER 5: GATEWAY CONFIGURATION
Virtual Server
Activating and configuring a virtual server allows one or more of the
computers on your network to function as a public server. For example,
one of your computers could be configured as an FTP server, allowing
others outside of your office network to download files of your choosing.
Or, if you have created a Web site, you can configure one of your
computers as a Web server, so that others can view your Web site.
To configure a virtual server:
1 Click New on the right side of the screen to open the Virtual Server
Settings dialogue box. (Figure 47
)
2 Enter the last digit(s) of the IP address of the computer in the Server IP
Address text box.
3 Select the Service from the pull-down list. (Figure 47
)
Figure 47 Virtual Servers Settings Screen
Or select Custom to specify a suitable name for the service and then enter
the port numbers required for that service. (Figure 48
)
Figure 48 Custom Setup Screen
4 Click Add to save the settings.
To Next Page
Loading...