122 CHAPTER 8: CONFIGURING VLANS
■ Not A Member — Indicates the interface is not a member of the
VLAN.
■ Not available for selection — Indicates the interface is not available
for selection.
■ Select port to add to this VLAN — Adds a selected port to the
VLAN.
■ Select All — Allows the user to select all ports to be added to the
VLAN.
■ Select None — Removes the ports selected.
To ren ame VLANs:
1 Select a VLAN from the list to be renamed.
2 Click . The VLAN is renamed, and the device is updated.
To add ports to a VLAN
1 Select a VLAN to modify.
2 Select the membership type for the selected ports.
3 Select ports to be added to the selected VLAN.
4 You may select different membership types on multiple ports by repeating
step 2 and step 3.
5 Click . The selected ports are added to the VLAN, and the device
is updated.
To Next Page
Loading...
