140 CHAPTER 9: CONFIGURING IP AND MAC ADDRESS INFORMATION
■ State — Displays the MAC address configuration method. Possible
values are:
■ Config Static — Indicates the MAC address is statically configured.
■ Port Index — Indicates the port through which the address was
learned.
■ Aging Time — Indicates the amount of time the MAC address
remains in the Dynamic Address table before it is timed out if no
traffic from the source is detected. The default value is 300 seconds.
■ Select All — Selects all ports for removal.
■ Select None — De-selects all ports for removal.
2 Select the ports to remove.
3 Click . The selected ports are removed from the address table,
and the device is updated.
To Next Page
Loading...
