193
Defining PoE Settings The Port PoE Setup Page allows users to configure ports for PoE.
To configure Port PoE Settings:
1 Click Port > PoE > Setup. The Port PoE Setup Page opens:
Figure 97 Port PoE Setup Page
The Port PoE Setup Page contains the following fields:
■ Select Ports — Selects the ports to be configured.
■ PoE State — Defines the port PoE state. The possible values are:
■ Enabled — Enables the port for PoE.
■ Disabled — Disables the port for PoE.
■ PoE Mode for selected & enabled ports — Defines the PoE mode
for the selected port. The possible values are:
■ Auto — Power is automatically allocated to the port, according to
port number. Lower numbered ports are assigned a higher priority
for power delivery.
■ Guarantee — Power is guaranteed to the selected port, provided
that the power is available. This setting overrides the priority
assigned to lower port numbers by the auto mode.
To Next Page
Loading...
