24 CHAPTER 3: RUNNING THE SETUP WIZARD
7 If the password is correct, the Country & Mode Selection screen appears.
(Figure 9
)
a Select the country in which the Access Point is to operate.
b Select the wireless mode for the Access point:
■ Select Access Point (default) if the Access Point is to be used to
provide networking for wireless clients. See Chapter 4
for
configuration information.
■ Select Client Bridge Mode if the Access Point is to be used to
provide access to a wireless network for a single client. See
Chapter 5
for configuration information.
The Country & Mode Selection screen is only displayed on initial
configuration of the Access Point.
Figure 9 Country Selection Screen
8 When you have logged in and selected a country and operating mode
either:
■ The Welcome screen will appear (Figure 10). Select the Wizard tab
and click Wizard.
or
To Next Page
Loading...
