30 CHAPTER 3: RUNNING THE SETUP WIZARD
Summary Figure 17 Configuration Summary Screen
When you complete the Setup Wizard, a configuration summary will
display. Verify the configuration information of the Access Point and then
click Finish to save your settings. 3Com recommends that you print this
page for your records.
If you have made changes to the LAN Settings or wireless configuration
options, you may need to reconfigure the computer you are using in
order to make contact with the Access Point again.
Your Access Point is now configured and ready for use.
See Chapter 4
for a detailed description of the Access Point configuration
screens.
See Chapter 5
for a detailed description of the Client Bridge Mode
configuration screens.
To Next Page
Loading...
