4
ACCESS POINT CONFIGURATION
Navigating
Through the Access
Point Configuration
Pages
This chapter describes all the screens available through the Access Point
configuration pages, and is provided as a reference. To get to the
configuration pages, browse to the Access Point by entering the URL in
the location bar of your browser. The URL is http://<IP Address of
the Access Point>, for example http://192.168.1.1. When
you have browsed to the Access Point, log in using your system password
(default admin).
If your Access Point is set up in Client Bridge Mode, see Chapter 5
to
configure your Access Point.
Main Menu At the left side of all screens is a main menu, as shown in Figure 18 on
page 32
. When you click on a topic from the main menu, that page will
appear in the main part of the screen.
■ Welcome - displays the firmware version of the Access Point, allows
you to change your password, and launch the Wizard
■ LAN Settings - allows you to configure IP address and subnet mask
information, setup DHCP server parameters, and display the DHCP
client list.
■ Wireless Settings - enables /disables access from wireless computers,
and provides facilities for improving the security of the wireless
network.
■ System Tools - allows the administrator to perform maintenance
activities on the Access Point.
■ Status and Logs - displays the current status and activity logs of the
Access Point.
■ Support - contains a comprehensive online help system
To Next Page
Loading...
