3COM
®
OFFICECONNECT
®
WIRELESS 108Mbps 11G POE ACCESS POINT DATA SHEET
2
Features
Description
FLEXIBLE HIGH-SPEED CONNECTIVITY
High-speed access and wide coverage 802.11g standard supports speeds up to 108 Mbps in SuperG mode.
Flexible network growth Supports up to 64 users per AP.
Wi-Fi certified 802.11g and WPA compatibility Helps ensure interoperability with Wi-Fi-certified products from other vendors; supports both 11g and 11b users.
ROBUST SECURITY FEATURES
Encryption: WPA, AES, TKIP and WEP Toughest industry-standard algorithms help keep wireless transmissions private.
Multiple security profiles Store up to eight different security settings; up to four security profiles can run at any time.
Multiple SSID support with SSID isolation SSIDs can be bridged together or isolated.
Access control Screens device MAC addresses to ensure that only trusted clients gain access to the WLAN.
802.1Q VLAN support Groups users according to data or traffic requirements to segment traffic flow based on business priorities.
RADIUS server MAC-based and 802.1X AAA support Centralizes wireless security through existing network RADIUS servers.
Rogue AP detection and logging Identifies and logs unauthorized, potentially harmful APs for remedial action.
INSTALLATION AND MANAGEMENT CONVENIENCE
Simple installation No need to drill holes or run Ethernet cabling to set up your network.
WDS bridge and repeater configuration APs function as bridges supporting point-to-point or multipoint modes; repeater mode extends wireless
coverage.
PoE support Expands installation options by eliminating the need for power adapters and AC outlets for APs.
Universal access method (UAM) support Lets you deploy the AP in hot spots or other sites where usage is tracked for billing purposes.
Access Point Discovery program Automatically discovers AP devices to simplify configuration and management.
SNMP support Enables the AP to be centrally managed by popular standards-based network management applications.
Auto configuration Copies settings from compatible APs on the WLAN, simplifying and speeding setup.
Syslog support Enables the AP to be centrally monitored by sending data to the network Syslog server.
Web browser-based administration Familiar browser interface lets you configure and manage APs from anywhere on the network.
Auto firmware update Automatically checks an FTP server for available firmware updates.
FREEDOM TO CHOOSE A BETTER NETWORK
Choose from several
power options to match
your installation needs.
First, the PoE access point
can be powered with the
supplied power adapter.
You can also power the
access point using an
802.3af-compliant PoE
switch. The switch
provides both data and
power through the
Ethernet cable.
The midspan solution distributes power
to the PoE access point over existing switch
connections, seamlessly extending network
connectivity into hard to wire locations.
To Next Page
Loading...
