1-9
reset lacp statistics
Syntax
reset lacp statistics [ interface interface-type interface-number [ to interface-type interface-number ] ]
View
User view
Parameters
interface-type: Port type
interface-number: Port number
to: Specifies a port index range, with the two interface-type interface-number argument pairs around it
as the two ends.
Description
Use the reset lacp statistics command to clear LACP statistics on specified port(s), or on all ports if no
port is specified.
Related commands: display link-aggregation interface.
Examples
# Clear LACP statistics on all Ethernet ports.
<Sysname> reset lacp statistics
To Next Page
Loading...
