1-12
In Ethernet port view, the interface-list argument is not available and the commands apply to only the
current Ethernet port.
Related commands: display dot1x.
Examples
# Specify to authenticate users connected to Ethernet 1/0/1 by port numbers.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x port-method portbased interface Ethernet 1/0/1
dot1x quiet-period
Syntax
dot1x quiet-period
undo dot1x quiet-period
View
System view
Parameters
None
Description
Use the dot1x quiet-period command to enable the quiet-period timer.
Use the undo dot1x quiet-period command to disable the quiet-period timer.
When a user fails to pass the authentication, the authenticator system (such as a 3Com switch) will stay
quiet for a period (determined by the quiet-period timer) before it performs another authentication.
During the quiet period, the authenticator system performs no 802.1x authentication of the user.
By default, the quiet-period timer is disabled.
Related commands: display dot1x, dot1x timer.
Examples
# Enable the quiet-period timer.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x quiet-period
dot1x retry
Syntax
dot1x retry max-retry-value
undo dot1x retry
View
System view
To Next Page
Loading...
