1-31
CLI view Description
acl-ethernetframe Layer 2 ACL view
acl-user User-defined ACL view
aux Aux 1/0/0 port view, that is, console port view
cluster Cluster view
detect-group Detected group view
ethernet 100M Ethernet port view
ftp-client FTP client view
gigabitethernet GigabitEthernet port view
isp ISP domain view
loopback Loopback interface view
luser Local user view
manage-vlan Management VLAN view
mst-region MST region view
null NULL interface view
peer-key-code Public key editing view
peer-public-key Public key view
poe-profile PoE profile view
qinq QinQ view
radius-template RADIUS scheme view
remote-ping Remote-ping test group view
rip RIP view
route-policy Routing policy view
shell User view
system System view
user-interface User interface view
vlan VLAN view
vlan-interface VLAN interface view
command: Command for which the level is to be set.
Description
Use the command-privilege level command to set the level of a specified command in a specified
view.
Use the undo command-privilege view command to restore the default.
Commands fall into four levels: visit (level 0), monitor (level 1), system (level 2), and manage (level 3).
The administrator can change the level of a command as required. For example, the administrator can
change a command from a higher level to a lower level so that the lower level users can use the
command.
To Next Page
Loading...
