1-32
View
Any view
Parameters
radius-scheme-name: Name of a RADIUS scheme, a string of up to 32 characters.
Description
Use the display radius scheme command to display configuration information about one specific or all
RADIUS schemes
Related commands: radius scheme.
Examples
# Display configuration information about all RADIUS schemes.
<Sysname> display radius scheme
------------------------------------------------------------------
SchemeName =system Index=0 Type=extended
Primary Auth IP =127.0.0.1 Port=1645
Primary Acct IP =127.0.0.1 Port=1646
Second Auth IP =0.0.0.0 Port=1812
Second Acct IP =0.0.0.0 Port=1813
Auth Server Encryption Key= Not configured
Acct Server Encryption Key= Not configured
Accounting method = required
Accounting-On packet enable, send times = 15 , interval = 3s
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts =5
Retry sending times of noresponse acct-stop-PKT =500
Quiet-interval(min) =5
Username format =without-domain
Data flow unit =Byte
Packet unit =1
calling_station_id format =XXXX-XXXX-XXXX in lowercase
unit 1 :
Primary Auth State=active, Second Auth State=block
Primary Acc State=active, Second Acc State=block
------------------------------------------------------------------
Total 1 RADIUS scheme(s). 1 listed
Table 1-5 Description on the fields of the display radius scheme command
Field Description
SchemeName Name of the RADIUS scheme
To Next Page
Loading...
