3Com Switch 4500 Family - Page 584

1-31
candidate switches to be automatically added into the cluster, you can set the topology collection
interval to zero (by using the ntdp timer command), which specifies not to perform topology collection
periodically.
Examples
# Display information about all candidate devices.
<aaa_0.Sysname-cluster> display cluster candidates
MAC HOP IP PLATFORM
3900-0000-3334 2 16.1.1.11/24 Switch 4500
000f-e20f-3190 1 16.1.1.1/24 Switch 4500
Table 1-6 Description on the fields of the display cluster candidates command
Field Description
MAC MAC address of the candidate device
Hop
Hops from the management device to the
candidate device
IP IP address of the candidate device
Platform Platform of the candidate device
# Display information about a specified candidate device.
<aaa_0.Sysname-cluster> display cluster candidates mac-address 000f-e20f-3190
Hostname : 4500-3
MAC : 000f-e20f-3190
Hop : 1
Platform : Switch 4500
IP : 16.1.1.1/24
# Display detailed information about all candidate devices.
<aaa_0.Sysname-cluster> display cluster candidates verbose
Hostname : 3Com
MAC : 000f-e200-3334
Hop : 2
Platform : Switch 4500
IP : 16.1.1.11/24
Hostname : 5500-EI-3
MAC : 000f-e20f-3190
Hop : 1
Platform : Switch 5500-EI
IP : 16.1.1.1/24