1-4
View
Ethernet port view
Parameters
inner-priority: 802.1p priority of the inner VLAN tag in a packet. This argument can be in the range 0 to 7
or a keyword listed in
Table 1-2.
outer-priority: Priority for the outer VLAN tag in a packet. This argument can be in the range 0 to 7 or a
keyword listed
Table 1-2.
Table 1-2 Description on 802.1p priority
IP Precedence (decimal) Keyword
0 Best-effort
1 Background
2 Spare
3 Excellent-effort
4 Controlled-load
5 Video
6 Voice
7 Network-management
For descriptions on the 802.1p priority values and the keywords listed in Table 1-2, refer to Qos
Operation.
Description
Use the vlan-vpn priority command to configure the mapping between the inner VLAN priority and the
outer VLAN priority. With the mapping configured, a port will encapsulate a packet with the specified
inner tag priority with an outer tag that has the corresponding priority.
Use the undo vlan-vpn priority command to remove the configuration.
By default, no mapping between the inner tag priority and the outer tag priority is configured, and the
switch uses the priority of the receiving port as the outer tag priority of packets. For descriptions on
receiving port priority, refer to QoS Operation.
Note that:
z This command is applicable to only the VLAN-VPN enabled ports.
z This command is mutually exclusive with the vlan-vpn inner-cos-trust command.
Examples
# Enable the inner-to-outer tag priority mapping feature for Ethernet 1/0/1. Insert outer tags with the
priorities being 5 to packets with the priorities of their inner tags being 3.
To Next Page
Loading...
