1-5
View
remote-ping test group view
Parameter
interval: Automatic test interval. It ranges from 0 to 65535 seconds and defaults to 0 seconds which
means no automatic test.
Description
Use the frequency command to configure an automatic test interval.
Use the undo frequency command to disable automatic test.
The system automatically tests at intervals specified by this command, where the argument interval is
greater than 0.
Related command: count.
Example
# Set the automatic test interval of the “administrator-icmp” test group to 10 seconds.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] remote-ping administrator icmp
[Sysname-remote-ping-administrator-icmp] frequency 10
remote-ping
Syntax
remote-ping administrator-name operation-tag
undo remote-ping administrator-name operation-tag
View
System view
Parameter
administrator-name: Name of the administrator creating an remote-ping test group, a string of 1 to 32
characters.
operation-tag: Test operation tag, a string of 1 to 32 characters.
Description
Use the remote-ping command to create an remote-ping test group and enter remote-ping test group
view..
Use the undo remote-ping command to remove the remote-ping test group.
To Next Page
Loading...
