Piper J-3 Cub
fully printable R/C plane for your desktop 3Dprinter
Fully 3D printable RC model of the classic plane, specially designed as a cheap and easy to
build SuperStable RC model for everyday flying. Many scale details such as airframe plating
encourages to create realistic paint jobs. This plane has been designed for printing from
PolyLight 1.0 LW-PLA active foaming filament, that allow even the small printed planes to be
as light as any other RC plane building technique. Get ready for flying with this great per-
forming flying legend!
The first fully printable airplane files prepared for your 3Dprinter, with flight char-
acteristics, comparable or even supperior to classic build model airplane.
This is not a dream, now you can print this HI-TECH at home. Simply download and print the
whole plane or spare parts anytime you need just for a cost of filament only about $10.
Extensive hi-tech 3d structural reinforcement making the model very
rigid while maintaining a lightweight airframe and exact airfoil even it’s just a plastic. This per-
fect and exact 3d structure is possible only thanks to additive 3dprinting technology. So wel-
come to the 21st century of model flying and be the first at your airfield.
Easy to assembly, you don’t need any extra tools or hardware, just glue printed parts
together and make pushrods for control surfaces. The rest of the assembly is very easy. Sim-
ply add brushless motor, ESC, servos and radio system. Don’t worry, detailed step by step
PDF/VIDEO is included. You’ll get a superb performing airplane with highly ecient power-
plant capable of flying 7+ minutes at full throttle and speeds exceeding 80 kph. Low stall
speed is achieved for easy landing on the other hand.
page 2
... print your plane | www.3DLabPrint.com
To Next Page
Loading...
Need help?
General