3D Systems, Inc.
7
USEFUL DOCUMENTS
The documents listed below are located in 3DS Central and www.3dsystems.com. These documents will help you get the most out of
your system.
ProJet® 3D PRINTING CLIENT ONLINE HELP
Run the client software, select Help > Help Topics in the printer’s window or in Build Preview window to launch the client online help.
The online help provide detailed instructions on how to use the client software to setup, run, and manage build jobs.
ProJet® 3500Max & 3510 SERIES QUICK REFERENCE GUIDE
Download to have quick reference on the control panel functions, how to load / remove cartridges, and how to run a test build.
VisiJet® MATERIAL HANDLING AND POST-PROCESSING GUIDE
This document has everything needed to guide you in safely handling and disposing of VisiJet® material, including relevant regulatory
guidelines for material disposal worldwide. It also provides information on how to clean parts once the build process is completed.
ProJet® 3-D PRINTERS FACILITY REQUIREMENTS GUIDE
This guide provides the dimensional data that is required when the 3D System’s Field Service Engineer installs the printer. Click on the
part number to view a copy for reference.
VisiJet® MATERIAL SAFETY DATA SHEET / SAFETY DATA SHEET (MSDS/ SDS)
The MSDS are located in www.3dsystems.com. Ensure everyone who handles VisiJet® materials is familiar with MSDS’s and follows
the safety guidelines. To order extra copies of MSDS’s, request the appropriate document part numbers are located on the bottom left-
hand corner of the MSDS.
4
To Next Page
Loading...
Need help?
General
