To Next PageTo Next Page
Need help?Do you have a question about the 3D Tender XPRO RIB Aluminium 420 and is the answer not in the manual?
General| Length | 4.2 m |
|---|---|
| Width | 1.92 m |
| Material | Aluminium |
| Tube Diameter | 0.48 m |
| Shaft | Short |
| Design Category | C |
| Beam | 1.92 m |
| Inside Length | 3.1 m |
| Number of Air Chambers | 3 |
Details the defects in material and workmanship covered under the warranty.
Specifies the warranty period of 1 or 2 years based on usage type.
Outlines the manufacturer's obligations for warranty repairs or refunds.
Procedure for submitting warranty claims and accessing service from authorized dealers.
Lists exclusions from the limited warranty, including misuse and normal wear.
Explains the meaning of Danger, Warning, and Caution labels and their associated hazards.
Emphasizes the importance of wearing life jackets for safety on the water.
Details the function and importance of using the kill switch lanyard while operating the boat.
Advises caution when operating near people in the water due to propeller risk.
Highlights the importance of understanding seamanship, navigation, and boat handling.
Recommends taking a safety course for improved seamanship and fatality reduction.
Warns against operating a boat under the influence of alcohol due to impaired judgment.
Stresses the importance of understanding navigation aids, charts, and rules for safe passage.
Specifies the need for portable extinguishers on boats with motors over 25Kw.
Advises conforming to ISO 9094-1 for fuel tank installation and fire protection.
Provides detailed technical specifications for XPRO RIB Aluminium models.
Details the technical specifications for the FAST LINE FL 240 model.
Provides technical specifications for LUX models 325, 300, and 280.
A checklist of essential pre-operation inspections and safety preparations.
Warning against using compressed air sources and potential consequences of over-inflation.
Advice on keeping drains open when the boat is out of water to prevent rain accumulation.
Warning not to open the drain plug when the boat is afloat but not in motion.
Explains how to adjust outboard trim angle for better planing and performance.
Crucial warnings regarding passengers, speed, and tow line rating during towing.
Prohibition of passengers onboard during lifting operations.
Instructions for unloading equipment and opening drain plugs before lifting.
Caution against using an outboard motor exceeding the maximum horsepower rating.
Advice on routine cleaning and maintenance for preserving the boat's condition.
Safety guidelines for cleaning agents and solvents used on boat materials.
Instructions for repairing PVC boat tubes using the provided kit and procedures.
Specific repair procedures for Hypalon coated fabrics using neoprene-based glue.
Flammability warning for glues and solvents used in repairs, emphasizing safety precautions.
