As soon as the height is set, save the coordinates. After saving, the Slide operations buttons are activated, and the adjusted magazine is marked
green.
Click the Slide out button. If you hear a friction sound, the settings are incorrect! Re-insert the slide without friction and stalling! When the
insertion to the first position is done, set the slider to position 19. Click Approach the slide, then click the Slide out and back button. No friction
and stalling are allowed. However, if there is friction or stalling, fine tune the Top slide position. In case of a successful adjustment, continue to
set all impacted magazines accordingly.
It is recommended to save each column after setting!!
5. Select Preview position in the Setup selection menu.
Caution!
The preview image display may be slightly distorted!
To Next Page
Loading...
