Need help?Do you have a question about the 3DHS SLICK 580 and is the answer not in the manual?
Read the manual to familiarize yourself and use an iron sock to protect covering seams.
Use thin CA for hinges and drops for high stress areas like mounts for proper bonding.
Properly balance and trim the aircraft to significantly enhance the flying experience.
Adjusting battery position to achieve optimal CG for aggressive 3D or precision aerobatics.
Recommended elevator control throws and exponential values for low rate and 3D flight.
Recommended rudder control throws and exponential values for low rate and 3D flight.
Recommended aileron control throws and exponential values for low rate and 3D flight.
To Next Page
General