Need help?Do you have a question about the 3Doodler Create and is the answer not in the manual?
General| Category | 3D Printing Pen |
|---|---|
| Power Source | AC Adapter |
| Temperature Control | Yes |
| Nozzle Diameter | 0.7 mm |
| Recommended Age | 14+ |
| Compatible Filament | ABS, PLA |
| Weight | 50g |
| Voltage | 5V |
Key safety warnings including hot nozzle, unplugging, cooling, and electrical shock hazards.
Product is for adult use only and must be kept out of reach of children.
Instructions on how to dispose of the 3Doodler responsibly and in accordance with local regulations.
Explanation of how the speed buttons control start, stop, and reverse functions.
Understanding the LED light colors for heating, ABS/FLEXY, PLA, and reversing.
Detailed breakdown of the 3Doodler pen's parts and their functions.
Explanation of the extrusion process: melting plastic and pushing it through the nozzle.
Instructions on plugging in, turning on the pen, and waiting for the indicator light to turn blue.
Guide to loading plastic and initiating extrusion using the speed buttons.
Step-by-step process to doodle your name as a first project.
Technique for drawing vertically in the air, lifting the pen from the surface.
Resources for additional guides, projects, and inspiration including YouTube and stencils.
Detailed steps for reversing plastic and safely removing it from the pen.
Advice on snipping plastic ends to prevent blockages and improve loading.
Guidance on handling plastic strands shorter than 5.3 inches for reversal or use.
Information on ABS, PLA, and Flexy plastic types, their settings, and identification.
Procedure for switching from ABS to PLA plastic, including setting changes.
Steps for removing plastic and turning off the 3Doodler pen correctly.
Explanation of the auto power-down feature and how to resume use.
Advice on taking breaks for the 3Doodler after periods of continuous use.
Introduction to the Mini Spanner, Mini Screwdriver, and Unblocking Tool.
Troubleshooting steps for when the pen does not power on or show a light.
Solutions for plastic not adhering to surfaces or curling around the nozzle.
Steps to resolve issues with plastic failing to extrude from the pen.
How to fix plastic leaks around the nozzle, often by tightening it.
Troubleshooting for when the plastic extrusion cannot be stopped.
Procedure for reversing plastic to remove it from the pen.
Tips for removing plastic that is too short or has moved past the drive gear.
Troubleshooting steps when the pen's indicator light remains red.
Importance of using correct temperature settings for different plastic types.
Advice on snipping plastic ends to prevent blockages and improve loading.
Guidelines for removing, tightening, and handling the nozzle to prevent damage.
Visual guide for assembling an Eiffel Tower using provided stencils.
Visual guide for assembling glasses using provided stencils.
To Next Page
