3E THERMOSALD ISC User Manual (English)

To Next Page

TEMPERATURE CONTROLLER FOR IMPULSE SEALING

THERMOSALD

ISC

MODULAR SYSTEM

QUICK START

(V5.1)

3E S.r.l.

Via del Maccabreccia 37/a - 40012 LIPPO DI CALDERARA ( BOLOGNA )

Tel. ++39 051 6466225-228 e-Mail: mail@3e3e3e.com

Fax ++39 051 6426252 web site: www

.3e3e3e.com

• AUTOMATIC CALIBRATION

• ANALISYS ON LINE OF BAND CHARACTERISTICS

•

• DIAGNOSTIC PANEL WITH 6 LANGUAGES

• SET UP OF SEALING BAND PPM CHARACTERISTIC

•

• RS 485 INTERFACE (OPTIONAL)

• WORKING WITH POTENTIOMETER

•

• BURN IN OF SEALING BAND

Need help?

Do you have a question about the 3E THERMOSALD ISC and is the answer not in the manual?

3E THERMOSALD ISC Specifications

General

Brand	3E
Model	THERMOSALD ISC
Category	Controller
Language	English

Summary

Warnings and Safety

General Warnings

Important safety information and warnings regarding the use of the equipment.

Safety Precautions

Detailed safety guidelines for installation, operation, and maintenance.

Wiring Diagrams and Dimensions

Change-Over Signals List

Lists terminal blocks and pin assignments for various signals.

Startup Procedures

System Inspection and Parts Usage

Steps for initial system inspection and parts verification before startup.

System Setup and Operation

Basic Setup with RS485

Guide to the basic setup of the system, including RS485 option.

Setup with Multi-lingual Panel and Potentiometers

Procedures for setup using multi-lingual panel and potentiometers.

Operating the Multi-lingual Control Panel

Instructions for operating the multi-lingual control panel and navigating its menus.

Calculations and Diagnostics

Theoretical Calculations and Diagnostics

Procedures for theoretical calculations and diagnostics using the data input panel.

Setup Procedures

Setup with Control Panel

Step-by-step guide for setting up the system using the control panel.

Setup in Manual Mode

Procedures for setting up the system using manual mode without the control panel.

3E THERMOSALD ISC User Manual