3LeggedThing PUNKS - Anatomy of an Airhed; AirHed Neo 2.0 Components; Important Safety Note

Release Plate
Plate Lock
Casing
Pan Base
Camera Screw
1 2
3 4
5 6
Ball Control
1
2
3
4
6
ANATOMY OF AN AIRHED
NEVER undo any of the knobs without holding your camera.
5
IMPORTANT
All 3 Legged Thing Punks 2.0 Tripod Kits include a quick release plate along with the AirHed Neo 2.0. Before using the
tripod, please check your release plate.
It is important that you tighten your release plate onto the clamp completely and check, before use. We
recommend placing the orange knob UNDER the lens, where it cannot be accidentally released.
We have engineered security cutouts into each of our AirHeds, and optional QR4 and QR7 Release
Plates with security bolts are available to purchase separately.
All Punks 2.0 Tripods ship with the AirHed Neo 2.0. The clamp has an orange locking knob (2) for releasing the Plate and a
black knob (6) which locks and unlocks the ball movement. The panning knob (on the rear of the head) locks and unlocks
the pan base.