3LeggedThing PUNKS - Detachable Legs and Monopod Conversion; Detaching Legs; Monopod Configuration

a
All three legs can be unscrewed directly from the leg hinge (a). You can
screw one of the legs into the bottom of the detached centre column
to make the monopod, without extra parts. Alternatively, you can screw
your AirHed directly onto the detached leg for a shorter monopod.
The clamp on the AirHed can be detached from the ball head and
mounted directly to the Tri-mount (d). This is particularly useful as a quick
release mechanism for the monopod leg
The Detachable Legs
a
The Neo 2.0 Clamp can be detached from the ball head
and mounted directly to the tripod canopy. This is
particularly useful as a quick release mechanism for the
monopod leg.
In the centre of the clamp is a hex screw. Undo this with
the tools provided. Once removed the 3/8” female thread
(a) will be visible. This can be screwed down onto any 3/8”
thread.
Additional Clamp Function