3M 3M-Matic 7000a Pro - 3.3 Table of Warnings

NA - ENG
March 2017
3M-Matic
™
7000a-7000a3 Pro
Page 6
3. Safety (continued)
3.3 Table of Warnings
• To reduce the risk associated with
mechanical and electrical hazards:
- Read, understand, and follow all safety
and operating instructions before
operating or servicing the case sealer.
- Allow only properly trained and
quali! ed personnel to operate and
service this equipment.
WARNING
• To reduce the risk associated with
pinches and entanglement hazards:
- Do not leave the machine running
while unattended.
- Turn the machine o when not in use.
- Never attempt to work on any part of
the machine, load tape, or remove
jammed boxes from the machine while
the machine is running.
WARNING
• To reduce the risk associated with
pinches, entanglement and hazardous
voltage:
- Turn electrical supply o and disconnect
before performing any adjustments,
maintenance or servicing the
machine or taping heads.
WARNING
• To reduce the risk associated with
hazardous voltage:
- Position electrical cord away from foot
and vehicle tra c.
WARNING
IMPORTANT! Cavity in the conveyor bed.
Never put your hands inside any part
of the machine while it is working.
Serious injury may occur (Figure 3-4).
Figure 3-4
Figure 3-2
Figure 3-3