46
Taping Head Adjustments – Refer to Manual 2
TAPE WEB ALIGNMENT – Manual 2
TAPE DRUM FRICTION BRAKE – Manual 2
APPLYING MECHANISM SPRING – Manual 2
ONE-WAY TENSION ROLLER – Manual 2
TAPE LEG LENGTH ADJUSTMENT – Manual 2
EXTENDED PLATE BUMPER – Manual 2
Figure 13-6 Box Drive Belt Tension Adjustment, Upper Belts (Infeed End)
• To reduce the risk associated with sharp blade hazards:
− Keep hands and fi ngers away from tape cutoff blades under orange blade guards.
The blades are extremely sharp
• To reduce the risk associated with mechanical and electrical hazards:
− Turn electrical and air supply off and disconnect before performing any adjustments,
maintenance or servicing the machine or taping heads
7000r-7000r3 Pro - NA
2014 June
WARNING
WARNING
• To reduce the risk associated with mechanical and electrical hazards:
− Turn electrical and air supply off and disconnect before performing any adjustments,
maintenance or servicing the machine or taping heads
WARNING
Pan Head
Screws (4)
Box
Wrench
Infeed End
Lock
Nut
Drive
Belts
Hex Head
Tension Screw
13-MAINTENANCE - Adjustments (continued)
To Next Page
Loading...
