11
Installation and Set-Up
Receiving And Handling
After the machine has been uncrated, examine the
case sealer for damage that might have occurred
during transit. If damage is evident, file a
damage claim immediately with the transportation
company and also notify your 3M Representative.
Figure 2-1 700rks Frame Set-Up
Machine Set-Up
It is recommended that the case sealer be set-up and
operated with product before placing it in the
production line. This approach will allow your
thorough review and familiarization with the 700rks
before subjecting it and operating personnel to a
production situation where time for set-up,
adjustments, and operator training usually becomes
limited.
The following instructions are presented in the order
recommended for setting up and installing the case
sealer. Following them step by step will result in an
installation in your production line that best utilizes
the many features built into the case sealer. Refer to
Figure 3-1 and 3/2 to identify the various components
of the machine.
For future reference, record machine serial number on
front cover of this instruction manual in the space
provided.
IMPORTANT Read "Warnings" on page 18
before attempting to set-up the case sealer for
operation.
1. Follow "Unpacking Instructions" label attached to
corrugated packing cover.
2. Remove the four angle brackets that secure the
machine legs to the shipping pallet.
To Next Page
Loading...
