3M 79 Series User Manual

Provides a general overview of the Series 79 Recorder.

Details the various functions and capabilities of the recorder.

Describes the tape transport mechanism and its operation.

Details on the Isoloop tape drive mechanism and its function.

Steps for inspecting the recorder upon delivery.

Guidelines for selecting a suitable installation environment.

Instructions for the initial setup of the recorder.

Overview of basic operating procedures and principles.

Detailed instructions for threading tape onto the machine.

Explanation of the In/Out monitor switching feature.

General guidelines for maintaining the Series 79 Recorder.

Information regarding field service and available support.

List of test equipment for maintenance and calibration.

Procedures for routine preventive maintenance tasks.

Instructions and best practices for cleaning the recorder.

Specific instructions for cleaning the capstan idlers.

General technical overview of the Series 79 Recorder.

Detailed technical description of the recorder's functions.

Technical explanation of the tape tension mechanisms.

Detailed description of the tape transport mechanical functions.

Technical details of the capstan drive system.

Explanation of operation when the transport is in play mode.

Introduction to the schematics section of the manual.

Provides a list of available schematics and their drawing numbers.

General introduction to the parts list section.

Instructions and procedures for ordering replacement parts.

A complete list of all parts for the Series 79 Recorder.