3M Accuspray 16580 - Replacement Parts and Accessories; Troubleshooting

13
ENGLISH
Replacement Parts and Accessories
Description PN
3M™ Accuspray™ Fluid Needle 16571
3M™ Accuspray™ HVLP Test Air Cap 16572
3M™ Accuspray™ Air Flow Control Valve 16573
3M™ Accuspray™ ONE Replacement Spray Gun Kit 16579
3M™ Accuspray™ Atomizing Head Refi ll Kit, 2.0 mm 16609
3M™ Accuspray™ Atomizing Head Refi ll Kit, 1.8 mm 16611
3M™ Accuspray™ Atomizing Head Refi ll Kit, 1.4 mm 16612
3M™ Accuspray™ Atomizing Head Refi ll Kit, 1.3 mm 16614
3M™ Accuspray™ Atomizing Head Refi ll Kit, 1.2 mm 16615
3M™ Accuspray™ Magnetic Spray Gun hanger 16236
Troubleshooting
Problem Cause Remedy
Gun leaking fl uid
behind trigger
Atomizing head seals Replace atomizing head and clean needle
Trigger sticking Dirty needle Clean needle
Leaking air around
Atomizing head seal
Atomizing head not
secured in latches
Remove atomizing head and reattach in gunbody and listen
for double click
Atomizing head won’t
stay on gun
Frayed latch tabs on
atomizing head
Replace atomizing head
Gun leaking fl uid in
gun holder
Wrong gun holder or
support
Use 3M gun hanger PN16236
Gun body leaking air
behind trigger
Bad Poppet seal Replace gun: Call 1-877-MMM-CARS or(1-877-666-2277)
Can't hear double
click when attaching
atomizing head
Frayed latch tabs on
atomizing head
Replace atomizing head
New atomizing head
leaking fl uid
Scored seals in
atomizing head
Clean needle and replace atomizing head