3M Detection Systems
System Configuration
4-3
3M 2000–2008
!
Caution
Possible personal injury or equipment damage.
Incorrect configuration and installation of the 120/240
voltage selector may cause personal injury or equipment
damage.
Install the fuse holder/voltage selector in the correct
orientation. See additional information in this manual on
voltage configuration and fuses.
!
WARNING
High Voltage
Personal Injury Hazard.
Attempting to change fuses without unplugging the
Detection System may cause personal injury. Inserting
the fuse holder in the incorrect direction could blow the
fuse.
To avoid any possibility of injury, disconnect the power
before attempting to change the fuse. To avoid blowing
the fuse, insert the fuse holder in the correct direction.
For continued protection against risk of fire, replace only
with the same type and rating of fuse.
To Next Page
Loading...
