31
10. MENU FUNCTIONS SCU-300
10.1. RADIO VOLUME
Adjusts the volume of connected external
communicationdevices and intercoms systems. Select one of
the 5 preset volume levels.
10.2. AMBIENT (ENVIRONMENTAL)
LISTENING VOLUME
Adjusts the Ambient (Environmental) Volume on connected
headsets. Select one of the preset volume levels.
10.3. PRIMARY MICROPHONE
Select the primary speech communications microphone.
Note: This menu level is only available when both TEP-300
and ComTac™ VII is connected to the SCU-300.
10.4. ADVANCED SETTINGS
10.4.1. BATTERY STATUS
Performs a battery status check on SCU-300, RCU, TEP-300
and/or ComTac™ VII.
10.4.2. RADIO SILENCE
Silences NIB, NFMI and Bluetooth
®
signals emitted from the
TMAS.
NOTE: Depending on the connected external communication
device, this setting MAY NOT silence detectable signals
emitting from those devices. Please refer to radio user
manuals regarding radio silence.
10.4.3. VOICE GUIDE VOLUME
Set the volume on the automatic audio messages. Select
between high or low based on the surrounding noise.
10.4.4. NFMI PAIRING
Pairs products to the SCU-300.
10.4.5. TRAINING MODE
Training mode is a test mode. The training mode allows the
user to test which placement of the SCU-300 is the best for
the current situation.
10.4.6. SCU PLACEMENT
Set where you want to place the SCU-300. Select between
chest position (recommended) or waist position.
10.4.7. AUTO POWER OFF
The SCU-300 will automatically turn off after 2 h if the
SCU-300 is not active during this time.
Note: The product will not turn off automatically if TEP-300 or
ComTac™ VII is connected and active.
Note: Press any button to delay auto power off.
10.4.8. WARNING SIGNALS
Enables or disables the different audio messages/warning
signals heard in the headset.
• ON - Enables all warning signals.
• OFF - Disable all warning signals.
10.4.9. RCU PRIMARY PAIRING
Pair the primary RCU-300 with the SCU-300.
10.4.10. RCU SECONDARY PAIRING
Pair the secondary RCU-300 with the SCU-300.
EN
EN
Note: This menu level is only available when a primary
RCU-300 is already connected to the SCU-300.
10.4.11. BLUETOOTH
®
PAIRING**
Pair the selected Bluetooth
®
unit with the SCU-300.
10.4.12. BLUETOOTH
®
FUNCTION BUTTON**
Transfer the functions of the F button on the SCU-300 to the
PTT II button on the RCU-300. Refer to “7.3.2. To transfer the
function button to the RCU-300”.
10.4.13. PRIMARY MICROPHONE
Select the primary speech communications microphone for
TEP-300 or ComTac™ VII if not paired.
10.4.14. BATTERY TYPE
Set the type of battery used on the SCU-300. Battery type is
used for battery life estimations.
• Alkaline - Sets the battery mode to alkaline battery.
• Rechargeable - Sets the battery mode to rechargeable
battery.
10.4.15. RADIO AUDIO
Select1ofthe3presetsoundproleswhenyouareusing
2radiosand/or2channels.Thesoundprolesetshowthe
sound from the radio and/or channel 1 and 2 will be heard.
Note: All other channels will be heard in both ears.
• Mix - The sound will be heard equally in both left and right
ear.
• Surround - The sound will be perceived as it is coming
from different directions. For example, 10 o’clock and
2 o’clock.
• Single - The sound will only be heard in one of the ears.
10.4.16. SYSTEM POWER OFF
Turns off all connected TMAS components.
Note: For instructions on how to turn off radio/intercom, refer
to the radio/intercom User Instruction.
10.4.17. FACTORY RESET
Reset the SCU-300 to the original settings.
11. SCENARIOS
11.1. NIB SCENARIOS
11.1.1. EXAMPLE 1
• Full range ≈ 5 m.
Everyonewithintherangeof≈5mhasfullaudioofthe
transmitted message.
• Transmission range ≈ 10 m.
EachpersonwithaNIBsystemhasa≈10mtransmitting
range.
• Faded audio range ≈ 10 m.
Peopleoutsidethe≈5mrangehaveaccesstofadedaudio
withintherangeof≈10m.Peopleoutsidethe≈10mrange
have no access to the transmitted message.
**These features are only are available in SCU-300NA WS GE AND SCU-300EUWS GE.